|
|
|
There are two ways to add a T&A device: manually adding a T&A device and automatically adding a T&A device.
Manually adding a T&A device
1. Choose Device > Device > Add to access the device addition interface.
Set the parameters as required based on the following steps:
Device Name: Enter any characters, with 20 characters at most.
Serial Number: Enter the serial number of the device.
IP Address: Enter the IP address of the device.
Port No.: Enter the port No. of the device, with the default value of 4370 in the Ethernet communication mode.
Area: In the drop-down list, select the area to which the T&A device belongs.
Time Zone: When a time zone is selected, the time on the T&A device will be automatically synchronized to the standard time in this time zone.
Fixed Transmission Time: Set the time for the device to automatically transmit data to the system, with the format of MM:SS. If multiple time points are set, please separate them with semicolons.
Real-Time Data Upload: Select whether to upload data in a real time.
2. After the setting is completed, click OK to add the device and return to the Device interface. The device list displays the T&A device.
?Note: If an employee is added to a device, when the employee information is uploaded to the server, the information will be automatically synchronized to other devices in the same area as the employee on the server.
2. Automatically adding a T&A device
|
|